Carpet Water Damage

Water Damage Inspection and Thermal Imaging in Melbourne

Water often travels well beyond the wet patch you can see. An inspection finds where it has gone, how much material is wet and whether the source is still active. We use a thermal imaging camera together with moisture meters. Call 1300 308 789 or 0434 314 234 to arrange one.

What an inspection covers

An inspection looks at the visible damage, the likely source, the materials affected and the moisture reading in each. It also checks areas people cannot see, such as wall cavities, ceiling spaces and subfloors.

What thermal imaging shows

A thermal camera shows surface temperature differences. Wet materials often look cooler than dry ones, so it highlights where moisture may be hiding. It does not measure moisture on its own, so every area it flags is checked with a moisture meter.

Moisture meters and mapping

Meter readings are taken at set points and compared with a dry reference reading from the same material. Mapping them gives a picture of the wet area, and the same points are re-checked during drying. See our equipment page for what each instrument does.

Hidden water and mould

Water that stays in a cavity or subfloor can lead to mould. Where mould is suspected, a crawl-space or cavity inspection can find it before it spreads. See mould remediation and structural drying.

The inspection report

Thermal images, meter readings and notes can be put into a report. That gives you and your insurer a record of what was wet and what was found.

Related pages

Talk to us

Tell us where the damp or damage is and what has happened. Call 1300 308 789, message us on WhatsApp or use the contact page.

Describe your water damage and we'll tell you the next step

Call 1300 308 789
Scroll to Top